Boat Trailer Lights

Before the boat ever leaves the driveway for the first trip of the season, it is important to make sure that the boat trailer is ready for the trip. In addition to checking the wheels and the wench, the boat trailer lights also need to be checked. Here is a quick guide to try and make the process a little easier.

If the lights are checked and found to not be working, the first thing that has to be done is to locate the problem. If one side is working and the other is not, it may just be a blown bulb. If nothing happens, we may be looking at a more serious problem that could end up in the entire unit having to be replaced.

Hook the trailer up to receptacle and then have someone hit the brakes and work the turn signals. If there is a problem on only one side, the fix is probably nothing more than changing out a single bulb. Remove the light from the side that is not responding and then run through the same process. If the lights are still not working properly, then it is time to dig a little deeper.

The wiring harness is a common problem and easy enough to check. By running a new two line wire from the vehicle battery to the bulb, you can once again check to see if there is an issue. If the lights work by doing this, the harness is bad and has to be replaced. A new one can be purchased online or at the local boating store and replaced fairly quickly.

The next place to look is at the fuses. These are again very easy to replace and check. If the lights are still not working, the electrical harness may be the cause of the issue. This process can be a little challenging and may be best left to a professional, if for no other reason than to make sure that the guarantee stays in effect. Hopefully, the repair will be something basic that can quickly be handled and the boat and the trailer will be on their way to the launch point.

Getting the boat in the water is something that most boat owners count down the days for. The snow starts to thaw and when the ice melts on the local waterway, you know it is only a matter of weeks before that boat can hit the water again. Once it is warm enough to head out without a coat on, it is time to check the boat trailer lights to make sure that trip to the launch does not result in a ticket for lights that don’t work.

Boat trailer lights are often out of sight and out of mind. However, the reality of the fact is that if those lights are not working and a police officer makes a stop, there will be a ticket issued. Because the trailer is in fact an extension of the vehicle, the tail lights must be working or the driver will be hit with fines.

The problem with boat trailer lights is that they are usually pretty easy to break. Forget the fact that they are getting dunked in the lake every other day, what about the rough road surfaces they are traveling across and the debris that is hitting them off of the road. It is not like they have the same protection that many car lights have. This vulnerability can lead to broken boat trailer lights.

When it is time to replace the boat trailer lights, the owner is advised to find something that is not only affordable, but that is constructed properly and will stand up to the elements as much as possible. While there are many brands out there, Wesbar boat trailer lights are always ranked among the best. Not only are they are great product, but they are also very inexpensive.

Everyone likes to save money and Wesbar will allow you to do exactly that. Whether you are looking for waterproof or submersible lights, they have plenty of products to choose from and all of them are at a reasonable price. This is the perfect combination for those of us that do not have bottomless pockets.